The easiest and most economical way to store your boat

PRODUCTS

 
  

Boat House Lift Capacities!
3,000 lb    4,000 lb       6,000 lb         8,000 lb

Available in four standard boat house models with capabilities from 3,000 to 8,000lbs.  Doozie Boats Lifts have been engineered and tested to be safe and dependable!

Key Benefits

•  Hot Dip Galvanized

Designed to lift boat from above, under a roof Can be mounted to properly spaced pilings

•  Lifts come Complete (except wood)
  • pipe with hangers and pulleys
  • spring loaded up/down switch for safety
  • 2 piece motor/drive cover
•  Installation - typically 2 - 4 hours
•  Side mounted drive for easy maintenance
•  Lift range 10' - Lift speed approximately 3.5 ft/min

  3000BH

•  8' Cradles Beams / 9' Optional
•  3/16" Stainless Steel Cable
•  3/4 HP Sealed Motor and Doozie Gear Drive
•  Wood Needed 2-2x8x12- Carpet Included



3000PT

•  9' PT Cradle lifts Boat under deck, not Pontoons
•  3/16" Stainless Steel Cable
•  3/4 HP Sealed Motor and Doozie Gear Drive
•  Wood Needed 4-2x6x16- No Carpet Needed



4000BH Deluxe

•  9' x 4" Cradle Beams
•  1/4" Stainless Steel Cable
•  1 HP Sealed Motor and Doozie Gear Drive
•  Wood Needed 2-2x8x12- Carpet Included

DOOZIE 4000BHO - 6000BHO Single Motor

Capacity Boat House Lift

•  Hot Dip Galvanized
•  Designed to lift boat from above, under a roof
•  Lift hangs on overhead steel beams
•  Center mounted drive pipe
•  Lift comes Complete (except wood)
  • pipe and hangers
  • grease gutters
  • 1/4" stainless steel cable
  • spring loaded up/down switch for safety
  • carpet for runners
  • 2 piece motor/drive cover
  • Wood Needed 2-2x8x12
•  Installation - typically 1-3 hours
•  Lift range 10'
•  Lift speed approximately 3.5 feet/minute

4000BHO

•  12' x 3" Overhead Steel Beams/Pulleys
•  1 HP Sealed Motor and Doozie Gear Drive
•  9' x 4" Cradle Beams

6000BHOSM

•  12' x 4" Overhead Steel Beams/Pulleys
•  6000# Motor and Doozie Gear Drive - 220 Volts
•  9' x 5" Cradle Beam with Adjustable BracketsKey Benefits

8000BHO

•  Hot Dip Galvanized
•  Designed to lift boat from above (under a roof)
•  Lift hangs on overhead steel beams
•  Lift comes Complete (except wood)
  • pipes and hangers
  • 12' x 5" overhead beams
  • 5/16" SS cable
  • DOOZIE double drive
  • 2 piece motor/drive covers
  • spring loaded up/down switches for safety
  • 9' x 6" I beam cradles with adjustable runners
  • carpet for runners
•  Wood needed 4 - 2x12x12
•  Installation - typically 2 - 4 hours
•  Lift range-10'
•  Lift speed approximately 3.5 feet/minute